Tag Archives: Tucson Omni

Your HVAC System and Ventilation: A Guide From Cortaro

The vent system in your Cortaro home is vital to the operation of your HVAC system. Without successful ventilation, your home won’t have the necessary clean air to keep you and your family healthy. So, what does proper ventilation require and how can you ensure your home has it? Here are some quick tips.

Install the Right Parts from the Start

Proper ventilation should result in even air pressure in your home to avoid problems with gas pilot lights. It should also be as energy efficient as possible and provide clean air through proper filtration and cleaning of the air that comes in. The best way to ensure your home has the ventilation needed to stay comfortable and safe for your entire family is to check the total size of the home and then measure the concentrations of certain pollutants like dander, pollen and smoke. A contractor can provide these services for you.

Supplements to Ventilation

Proper ventilation should not only provide fresh air, but it should also ensure your home has clean air. The air outside may be fresher, but it can be filled with pollutants like pollen, dander and smoke. These should be removed before they get inside and into the lungs of your loved ones. To do this, you need a full sized air cleaning system that removes particles from the air down to 0.3 microns.

HEPA filters can do this, as will electronic air cleaners which can ionize and remove smoke and gas particles. Make sure you discuss filtration and cleaning with your contractor when they visit your home.

How Does Central AC Work? A Question From Safford

We pretty much just take the fact of central air conditioning for granted these days in Safford. It is present almost everywhere and it is hard to imagine getting through a long hot summer without it. But if you are like most people, you probably do not actually know how central air conditioning works. While you can certainly take advantage of it without understanding it, the basic concept is pretty simple.

Basically, central air conditioning systems are composed of an outdoor unit that typically houses the compressor and condenser and an indoor unit that manages the flow of air throughout your house or other building. This indoor unit is typically either an air handler or a furnace, and it directs the flow of air through a series of ducts that feed into the various rooms of the house.

The cool air originates in the outdoor unit and is blown into the house, gradually absorbing heat as it goes, and that air is then returned to the outdoor unit to be re-cooled. What actually happens in the outdoor unit involves the cycle of a type of refrigerant from a gas to a liquid and back. In the condenser area of the outdoor unit, the pressure on the refrigerant is lessened and it is able to absorb heat from the air returning from the house.

This gas, while warmer than the liquid refrigerant, is still quite cold and acts to cool the air being passed back into the house. As that refrigerant moves along to the compressor area, the gas is converted to a liquid and is forced to release the heat it had been holding. In that way, the air conditioner is able to remove heat from the inside of your house and release it outside.

Your air conditioning system is also generally hooked up to a thermostat, which is what controls when the unit switches on and off. You can set the thermostat at the temperature you would like to maintain inside your house and the thermostat will signal the air conditioner to switch on when the indoor temperature rises above that level. And once the indoor temperature is again below the preset level on the thermostat, the air conditioner will switch off again.

IAQ – Filters

Installing air filters in your home is a great way to make sure the air your family breathes every day is safe and free of contaminants. But you shouldn’t just go out and buy the first air filter you see. When it comes to quality air filtration, HEPA filters are the industry leaders, and for good reason. They can remove up to 99.97% of indoor air contaminants that measure 0.3 microns or larger, a phenomenal success rate unmatched by any other filters on the market.

Proper HEPA Filter Practices

To be effective, even HEPA filters need to be installed and maintained properly. Consulting with an HVAC professional is the best way to ensure that the air filtration system you get is completely compatible with your home heating and cooling system. The filter must also be installed in the appropriate place so it can catch the most contaminants. Especially if you have a forced air heating and cooling system, there are a lot of potential locations for your filters. A good HVAC professional can help you determine which spots will serve you best.

Changing Your HEPA Filters

Once your filtration system is in place, you should maintain it properly so it continues to catch and remove all those unwanted particles from your indoor air. Keeping up with the proper filter changing schedule is a big part of this. Every HEPA filter comes with manufacturer’s recommendations on how often the filter needs to be changed. Prefilters often need to be changed more often, sometimes even once every 90 days, so you should find out if your system has one of these as well.

Many HEPA filters only need to be changed once every year or two, but the conditions in your home can make it necessary to change them more often. For example, if your home has a lot of dust or other specific air contaminants, you may need to change your HEPA filter as often as once a year.

Both HEPA filters and prefilters are quite easy to remove and replace. If you’re not sure how to do it, have your technician show you the next time they come out for a routine maintenance visit or when they put install the system. As long as you replace your filters regularly, you should have no trouble maintaining high indoor air quality with a HEPA air filtration system.