Tag Archives: Pinal County

Breakdowns – How to Handle an Overloaded AC: A Tip from Tucson

The last thing you need on a hot day in Tucson is for your air conditioner to suddenly cut out. Without the cooling power it provides, your house will get uncomfortable quickly. Fortunately, once you know why this happens, there are several things you can do about it.

Why Air Conditioners Cut Out

The most common reason for air conditioner failure is an overabundance of pressure in the unit. This happens because the coil gets too hot, causing the pressure to rise in the entire device. As the pressure rises past a certain point, an automatic safety shutoff system is engaged. If you can stop the coil from heating up to this point, you can keep your air conditioner running.

How to Keep Them Running

Of course, this is easier said than done. Since your condenser unit with the coil inside is located outside in the heat, it’s only natural for it to get hot during the day – especially an extra hot day when you’re using your air conditioner a lot. You also need to be careful not to put anything over or up against your outdoor condenser unit.

While this may block the sunlight, it will also keep heat in the system and prevent the air conditioner from removing exhaust naturally. So in order to keep your air conditioner as cool as possible, make sure there is nothing up against the vents or impeding air flow in any way. Once you’ve done this, try and find a way to provide shade for you air conditioner without placing objects near the device. Blocking out direct sunlight is the best way to keep your air conditioner cool as long as you can do it without interfering with the system’s natural air flow.

Getting it Back On

If your unit does cut out on you, don’t despair. The best thing to do is to wait about a half hour to give your unit a chance to cool off on its own. Then, spray the coil and other overheated areas with a fine mist of cool water. This should lower the temperature enough that the system can come back on without any further complications.

If the problem persists despite the work you’ve done to keep it cool, you may want to call in a professional to take a look and make sure nothing is broken or worn inside to cause the overloads. Most of the time a little maintenance will take care of the problem, but if not, you’ll want to get repairs done quickly to avoid a full breakdown.

Control Your Home’s Moisture – Humidity Is Key in Benson

Most people don’t give a second thought to the humidity in their Benson home until it is either much too high or uncomfortably low. And if you have a state of the art home comfort system, you’re probably comfortable inside all year long anyway. But there are several reasons to pay attention to the humidity level in your home and take action if you realize that it isn’t providing the comfort level you’ve come to expect.

Many problems arise from excess or inadequate indoor humidity levels. For instance, a lack of humidity causes your skin and nasal passages to dry and crack, which is obviously pretty unpleasant. But air that’s too dry can also make the symptoms of allergies, asthma and colds worse. Anyone in your home suffering from these conditions will be much more comfortable when the right level of humidity is restored. Another great benefit is that the indoor air quality will no longer contribute to longer and more sever colds and flus in the winter.

Too much humidity is a problem too, though. It promotes the growth of mold, which is a big contributor to indoor air pollution. Mold spores are a big time allergen. The more moisture there is in your home, the more mold there’s likely to be. High indoor humidity levels also promote the growth of dust mites, another major indoor air contaminant and allergen.

Of course, you probably have a great indoor air cleaner in place to get all of those contaminants out of your home’s air supply. But if the air inside your home is too moist or too dry, it can actually make it harder for the air cleaner to remove all types of contaminants. Not only are you putting a greater strain on your body and immune system, you’re asking your air cleaners to work much harder, which can cost you money in repairs and filter replacements.

For all of these reasons, it’s important to put in a humidification system to maintain the overall quality of your indoor air. Plus, a properly humidified environment is simply more comfortable to live in. A humidifier can easily be integrated into your current home heating and cooling system, so you don’t have to worry about high installation costs or equipment compatibility. All you have to do is sit back, relax and breathe in the fresh air that your humidification system makes possible.

Save with Insulation in Casa Adobe

When you are looking for ways to save money around your Casa Adobe house, it can be difficult to know where to begin. However, if you start examining things closely, you can actually find many small ways to cut here and there to save a few dollars. Of course, the savings you will generate by making these moves need to be worth the expense of making them, and it some cases that equation does not work out to your advantage.

For instance, when you are trying to save money on your heating or air conditioning bills, is it really worth it to get a top of the line system installed? Do you really need a 97% AFUE furnace? Sure your monthly heating bills will be lower, but it costs so much to install that it might not be worth it. For some people, the right choice will be to opt for the highest efficiency system, but that is far from a universal truth.

However, there is one investment along these lines that will be worth it no matter what your particular situation is. And that is making sure that your house has proper and effective insulation installed everywhere necessary. Certainly, most houses have insulation of some kind. But do you really know that your insulation is effective and that it is in the right place?

With the new technologies and types of insulation available, you should not have to pay too much to have someone come in to check your insulation and improve upon it. And you very likely will not believe the difference it can make in the way your house feels.

Proper insulation will keep heat in and cold out in the winter and the opposite in the summer. You will quite simply be more comfortable all year round. Plus, you will see a pretty dramatic drop in your home heating and cooling bills because your HVAC systems will not have to work as hard to keep your home comfortable.

This will also translate into less wear and tear on the system over all, making it possible for you to extend the useful life of your HVAC system as well. The savings that can be generated by having proper insulation put in will well outweigh the cost of that insulation in just about every case.

Things You Should Have Inspected: A Tip From Sahuarita

Life would be great in Sahuarita if we could just depend on things to work and last without requiring any sort maintenance or upkeep. Unfortunately, that is not the case. As good as modern manufacturing and engineering are, our devices, appliances and machines still need attention in order to stay in peak condition.

The Body Is a Machine

To illustrate this, think about the human body. We put a lot of wear and tear on ourselves, which can lead to minor illnesses, injuries and the like, especially when combined with the effects of aging. One way we attempt to stay ahead of the game is to get an annual physical. Once a year, we pay a visit to our doctor to make sure everything is in tip top shape. He checks everything out, lets us know what’s going on, helps us treat anything that may be acting up and then off we go, ready to go for another year.

And So Is Your Furnace!

Likewise, your furnace needs annual attention as well. Although newer electrical furnaces can go up to three years without regular maintenance, gas and oil models should be inspected every year, as should older systems. During an annual inspection, an HVAC professional will:

  • Clean out fuel lines, keeping every flowing freely and efficiently.
  • Check for parts that are wearing out or need to be replaced.
  • Clean and inspect the heating ductwork as well as the vents.

These simple and routine maintenance tasks can extend the life of your furnace by years, keeping your home warm and your heating costs low.

The Best Time for Inspection

The best time to get your furnace inspected is in the late summer to fall months. Although you may still be trying to squeeze every bit of enjoyment from those last warm days, the cold weather comes not far behind, and you will want your furnace ready when that happens. A fall inspection ensures that your furnace will be all set when those temperatures start to drop, so your family won’t have to tolerate any chilly nights.

Annual maintenance is important for health and longevity, both for you and your furnace. You can even schedule your physical and your furnace inspection around the same time so you don’t forget. Make an appointment for your car while you’re at it, too. That makes three things you won’t have to worry about during those cold winter months.

Why the SEER Is Important When Choosing an Air Conditioner? A Question From Oro Valley

There are many things to take into account when you are trying to pick out a new air conditioning system in Oro Valley. You want one that will be powerful enough to cool the required space but not so big that it turns your home into a walk in freezer. With so many models and types on the market, it can be difficult to figure out what details you need to pay attention to and what you can ignore.

The seasonal energy efficiency rating (SEER) that each air conditioner comes with is not something you should ever disregard, however. This number is a reflection of the overall energy efficiency of the unit and it can have a huge impact on the amount you pay to keep running your air conditioner every month. The higher the SEER of a product, the more energy efficient it is and the lower your monthly bills will be.

Of course, air conditioners with a higher SEER also generally come with a higher price tag, so you will have to weigh the amount of your potential savings against the difference in price of units with different SEERs.

To calculate this, you will need to know exactly how much more energy efficient one model is compared to the others. For instance, when you know that an air conditioner with a SEER of 11 is 7% more efficient than one with a SEER of 10, you are in a better position to evaluate the potential savings.

You will still need to translate this into dollars, of course, because the amount you save with a 7% boost in efficiency will depend largely on how much you typically pay already. If you are only paying around $320 a year with a SEER 10 air conditioner, upgrading to a SEER 11 will only save you about $30. However, if your annual cooling bills are closer to $1000, you will easily save close to $150 with this small upgrade.

SEER numbers go much higher than 10 and 11 too. In fact, the highest you will probably get is a 19.5 SEER, but that will more than cut your cooling bills in half if you are starting with a SEER 10. Still, the actual amount that you will save depends on how much you were paying to begin with, but if your cooling bills are already very high, it may be worth it to invest in an expensive but very high efficiency system. If you need more information, contact your local HVAC contractor.

How to Use AC Most Efficiently

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer without. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.
  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.